EQUIPMENT SPECIFICATIONS

The equipment concept has been selected on the basis of the following Equipment Specifications and Atlas Technologies’ Standard Equipment Design and Manufacturing Specifications: LIST ALL CUSTOMER SPECIFICATIONS HERE 

• Any specifications not defined in this document are to Atlas Standards.

          Bundle Turnover Capabilities:

                    Stack & Pallet Weight:  25,000 Pounds Maximum

                    Stack Sizes:                  Minimum = 16” x 16”

                                                          Maximum = 92” x 184”

                    Stack Height:                18" Maximum

                                                          2" Minimum

                    Load Table Height:       48” - Approximate

                    Clamp Direction(s):       Down Only

                    Steel Pallet Sizes:         87.56” x 91.81 x 10”

                                                          130.50” x 91.81” x 10”

                                                          172.50” x 91.81” x 10”

                    T/O Stroke Distance:     18” Maximum – Approximate

                    Load Table Speed:        19.3 FPM - Approximate

                    Clamp Speed:               1.34 FPM - Approximate

Rotate Speed:               180° in 54 Seconds - Approximate

Controls:                       Rockwell (A-B) MicroLogix PLC

                                      Rockwell (A-B) PanelView HMI

 Facility Specifications:

 Utilities:            460 VAC, 3 phase, 50/60 HZ

 Safety:              Rotating and moving machine parts are guarded by sheet metal guards as required.  Area guarding is included.

 Lubrication:      Periodic manual grease lube of bearing slides.  Inaccessible lubrication points are piped to accessible locations where practical.